Electrical & Lighting  /  Service

Ceiling Fan Install in Santa Rosa, California

Ceiling fans installed on a fan-rated box, mounted solid and balanced to run smoothly.

I install ceiling fans throughout Santa Rosa and Bennett Valley, usually where a light or an older fan already hangs. I check the box, add a fan brace when needed, wire and mount the fan, and balance the blades. Insured, and tidy about it.

Ceiling Fan Install in Santa Rosa

Fans that move air without wobble

Looking for ceiling fan installation in Santa Rosa? A fan is heavier than most light fixtures and it moves, so the box it hangs from matters. I confirm the box is fan-rated, install a brace when it isn’t, and balance the blades before I leave.

Ceiling Fan Install, close-up example
Ceiling Fan Install, example

Ceiling height shapes the install. Standard ceilings often suit a short downrod or a close-mount fan. Taller ceilings need a longer downrod, and sloped ceilings need a canopy rated for the angle. Share the ceiling height and a photo, and I’ll tell you which parts you’ll need.

Remote and wall-control kits are common add-ons. With only one switch on the wall, a remote lets you run the fan and the light separately.

How it works

Send a photo of the current fixture, the ceiling height, and the fan you’re looking at or have already bought. I’ll reply with an upfront estimate and anything to check before you buy, like downrod length or a slope kit.

On the day, I turn off the circuit, take down the old fixture, and look at the box and wiring. If the box isn’t fan-rated, I put in a fan brace. Then I assemble and hang the fan, connect it, test each speed and the light, and balance the blades. Packaging and the old fixture get cleaned up.

When it’s not a small job

I focus on replacing an existing ceiling light or fan where there’s already a box and a switch. Adding a ceiling box where there’s no wiring, running a new switch, or ceilings too high for a ladder are bigger jobs. If the wiring looks old, damaged or overloaded, I’ll stop and recommend a licensed electrician.

Balanced, secure, quiet.

What I handle

  • Fan-rated box or brace install
  • Replacing a light fixture with a fan
  • Fan assembly, mounting and wiring
  • Downrods and sloped-ceiling kits
  • Remote and wall-control receivers
  • Blade balancing and old fixture removal
Next step

Ready to get started?

Send a few photos or a short description of what you need. I’ll reply with clear next steps and an upfront estimate.

Request an Estimate
Common questions

Ceiling Fan Install FAQ

Can a fan go where my light fixture is now?

Often, yes. The box has to be fan-rated or braced, and many boxes made for lights aren’t. I check when the old fixture comes down and add a brace if it’s needed.

What size downrod do I need?

It depends on your ceiling height and the fan. Send me both before you buy, and I’ll tell you what length puts the blades at a comfortable height.

Can you install a fan on a sloped or vaulted ceiling?

Yes, with a canopy or slope kit rated for the angle and a downrod long enough for the blades to clear the ceiling. Very tall ceilings may need more than a ladder, so send a photo first.

Why does a new fan wobble?

Usually a blade is slightly out of balance or a bracket is loose. I check the mounting, tighten everything, and balance the blades before I leave.

Do you supply the fan?

Usually you pick and buy the fan, so you get the look you want. Send me the model before you order and I’ll check that it suits the room and the ceiling.

Can I control the fan and light separately?

With one wall switch, a remote kit is the simplest way. Adding a second switch means new wiring, and that may need a licensed electrician.