Bathroom  /  Service

Toilet Leak Repair and New Toilet Installation in Santa Rosa, California

Running toilets, drips and base leaks fixed, and new toilets set level on a fresh seal.

I fix common toilet leaks and replace old toilets around Santa Rosa and Bennett Valley. Like-for-like swaps and small leak repairs are handyman work. Anything that means moving a drain or supply line goes to a licensed plumber, and I’ll tell you if that’s the case.

Toilet Leak Repair and New Toilet Installation in Santa Rosa

Toilet work that keeps floors dry

A running toilet wastes water, and a slow leak at the base can quietly damage the floor underneath. I track down where the water is coming from and fix what’s worn. When a toilet needs replacing, I pull the old one and set the new one level and secure on a fresh wax or wax-free seal.

Toilet Leak Repair and New Toilet Installation, close-up example
Toilet Leak Repair and New Toilet Installation, example

Most running toilets come down to a worn flapper, a fill valve that won’t shut off, or a chain that’s the wrong length. Drips at the wall are usually the supply line or its connection. Those are quick repairs once the cause is clear.

Water around the base is different. It can mean a failed seal, a toilet that rocks, or a flange that’s cracked or sitting too low. When I pull a toilet, I check the flange and the floor around it before anything new goes down, and I tell you what I see.

What to tell me before I come out

A few details help me give you an upfront estimate. Tell me what’s happening: running, dripping at the tank, water at the base, or a toilet that rocks. Send a photo of the whole toilet, the shutoff valve and supply line at the wall, and the floor around the base.

If you’re replacing the toilet, send the brand and model of the new one, or a link if you haven’t bought it yet. It needs the same rough-in as the old one, which is the distance from the wall to the drain. A photo with a tape measure in it lets me check.

Some toilet problems aren’t small jobs. Moving a toilet to a new spot, a damaged drain line, a soft or rotted subfloor, or a shutoff valve that won’t close can call for a licensed plumber or a floor repair first. I’ll flag it rather than set a new toilet on top of a problem.

Stop the leak. Install it level.

What I handle

  • Running toilet diagnosis and repair
  • Flapper and fill valve replacement
  • Supply line replacement at the toilet
  • Tank-to-bowl leak repair
  • Toilet removal and reset on a new seal
  • Like-for-like toilet replacement
  • Old toilet hauled away on request
  • Leak check and cleanup
Next step

Ready to get started?

Send a few photos or a short description of what you need. I’ll reply with clear next steps and an upfront estimate.

Request an Estimate
Common questions

Toilet Leak Repair and New Toilet Installation FAQ

Why does my toilet keep running?

Usually the flapper isn’t sealing or the fill valve isn’t shutting off. Both are common parts to replace once I confirm which one is the cause.

There’s water around the base of my toilet. What does that mean?

It often means the seal under the toilet has failed, but it can also be condensation or a drip from the tank or supply line above. I find the source first, then pull and reset the toilet on a new seal if that’s the problem.

Wax ring or wax-free seal?

Both work when the flange is at the right height and the toilet sits solid. I’ll recommend one based on your flange and floor, and I’m glad to use the one you prefer.

What if the flange is broken?

I’ll show you before going further. Some flanges can be repaired in place, and others need a licensed plumber. Either way, it gets dealt with before a new toilet goes on.

Will a new toilet fit where my old one was?

Most do, as long as the rough-in matches. That’s the distance from the finished wall to the center of the drain, and I can check it from a photo or when I visit.

Can you take the old toilet away?

Yes, on request. Mention it when you ask for an estimate so I can plan for it.